| I want to give anyone that is
thinking about building a chassis from brass a single place to find the
resources they may need. I searched high and low to find some tutorials and here
is the results of my labor. If you have an
article or pictures of a simple brass chassis please send them to me so I can
add them. I don't want to get into anything to elaborate because I think
www.Scratchbuilt.com has that covered. I would like to thank each of the authors for their great articles. |
Here is a collection of scratch built chassis I found on the internet and online forum. If you have some pictures you want to add to the list please send them to me. Click on a thumbnail for a larger picture. |
| Chris Briggs | Chris Briggs | Russell Sheldon | Russell Sheldon | |
|
|
|
|
|
|
| Russell Sheldon | Russell Sheldon | Chris Briggs | Chris Briggs | |
|
|
|
|
|
|
| Brian Ferguson | Brian Ferguson | Graham Windle | Graham Windle | |
|
|
|
|
|
|
| Mark "TightLip" | Mark "TightLip" | Mark "TightLip" | ||
|
|
|
|
||
| Graham Windle | Graham Windle | Graham Windle | ||
|
|
|
|
||
| Larry Shepherd | Larry Shepherd | Larry Shepherd | ||
|
|
|
|
||
| Larry Shepherd | Larry Shepherd | Larry Shepherd | ||
|
|
|
|
||
| Al Penrose | Al Penrose | Al Penrose | Al Penrose | Al Penrose |
|
|
|
|
|
|
| John P. | John P. | John P. | John P. | John P. |
|
|
|
|
|
|
| Brian Saunders | Chris Briggs | Professor Motor | Phillip Niyazi | |
|
|
|
|
|
|
| Mark "TightLip" | Howmet TX on Slotforum | gascarnut | ||
|
|
|
|
||
| Russell Sheldon | Russell Sheldon | |||
|
|
|
|||
| Brent Carlson | Brent Carlson | Brent Carlson | Brent Carlson | |
|
|
|
|
|
Old Scaley Porsche 911 |
| Brent Carlson | Brent Carlson | |||
|
|
|
Carrera Corvette Chassis | ||
|
|
|
|
||
|
|
|
|
||
| Stingray Raceway | Scratchbuilt.com | Brent Carlson | Russell Sheldon | Rick Morrissette |
| Brass Inline | Great site | Aluminum channel Chassis | ||
| Name | SCI Nick | HRW Nick |
| Rick Morrissette | weld w3 | weld w3 |
| Russell Sheldon | ||
| Brent Carlson | MrBugs | MrBugs |
| Stingray Raceway | ||
| Al Penrose | bwaminispeed | bwaminispeed |
| Steve O'Keefe | ||
| Larry Shephard | ||
| Larry Geddes | Larry Geddes | |
| Chris Briggs |
| What you will need to get started by BWA. bwaminispeed: You only need 1/16" tube and rod,3/32 tube,1/8 tube and 5/32 tube, and all 4 sizes in square as well. bwaminispeed: Couple of pieces in each of these sizes will keep you going bwaminispeed: .047,.050,.063,.078(motor shaft size) and .093 music wire should do you bwaminispeed: .093 is axle size |
| I will be posting pictures of my brass chassis soon. I'm going to use a combination of Larry G's theory, Chris B's "Torsion Bar Chassis" and Al P's instruction and common sense. I also want to try Larry S's Brass F1 chassis. |
| HOME | E-MAIL ME |