Carlson's Slot Cars
Home of Custom made SensorTraks
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Pictured below is a TSRF guide that I chopped up to replace
the stock guide on a Scalextric TVR. I should probably have
taken pictures of the process as I did it but unfortunately I
didn't think of it until after I was done. The original guide
broke and when I ordered my new chassis I forgot to order a new
guide. It is probably a good thing because I find the new
Scalextric guide a little brittle. First step is to place the TSRF guide in place on the car then from the top of the chassis mark the new guide where you will need to shave. When done you will end up with something like what is pictured below. |
 |
Side View 1. |
 |
Bottom view of the guide. This shot clearly shows the motor wires coming through the guide and folding over and through the new slot I cut.. |
 |
Front View. |
 |
Side View 2. |
 |
Top View. |
 |
New Guide mounted in chassis, top view. |
 |
New Guide mounted in chassis, bottom view. |